Gyro manual






















Thank you for purchasing a GY AVCS gyro. Before using your new gyro, please read this instruction manual thoroughly and use the gyro properly and safely. After reading this manual, store it in a safe place. FOREWORD The GY is a small heading hold AVCS rate gyro for model he-licopters. Advanced tail control from electric helicopters to 90 size. • The contents of this manual are subject to change without prior notice. • This manual has been carefully written. Please write to Futaba if you feel that any corrections or clarifications should be made. Thank you for buying a GY AVCS gyro. Before using your new gyro, please read this manual thoroughly and use the gyro properly and safely.  · Hi there, This is a long shot.i am new to this site and need the pdf user manual for the GT Gyro that i have in my Thunder Tiger Raptor E the GT had a pdf available online i have emailed Thunder Tiger and Ace RC neither has returned my email as i am sure they dont want to be bothered with ancient technology.


Disable the gyro initially by setting the slider to centre. 7. Move all the sticks once to their end-points with the set maximum travels: this stores the end-points. As of software version V04 these values are stored in the iGyro. 8. Launch the model and fly it parallel with the runway. Now steadily increase gyro gain. Thank you for purchasing a GY AVCS gyro. Before using your new gyro, please read this instruction manual thoroughly and use the gyro properly and safely. After reading this manual, store it in a safe place. FOREWORD The GY is a small heading hold AVCS rate gyro for model he-licopters. Advanced tail control from electric helicopters to 90 size. Gyro Gain: Manual adjustable, single rate Tail Lock/Rate Modes: Manual on/off INTRODUCTION SETUP ADJUSTMENT JR's latest Piezo gyro, the GT, utilizes a new state-of-the-art integrated design for easy installation, while retaining the same performance levels found in the previous JR NEJ-G


User Manual V Jun, Revision Thank you for purchasing our products. A3 Pro V2 is a high-performance and functional 6-axis gyro and stabilizer designed for R/C airplanes. In order for you to make the best use of your gyro and to fly safely, please read this instruction manual carefully and set up the device as described below. IMPORTANT NOTES. attached to the Gyro, the right aileron moves down. 3 2 4 Rotate the nose of the model to the right (yaw axis). The rudder should move left. Rotate the nose of the model to the left (yaw axis). The rudder should move right. 5 6 Make sure the gyro system is facing the direction of forward ˜ight prior to take off or you may lose control of your airborne. Gyro Gain: Manual adjustable, single rate Tail Lock/Rate Modes: Manual on/off INTRODUCTION SETUP ADJUSTMENT JR’s latest Piezo gyro, the GT, utilizes a new state-of-the-art integrated design for easy installation, while retaining the same performance levels found in the previous JR NEJ-G

0コメント

  • 1000 / 1000